Due to how this product is folded and assembled, the back side is never visible so we only print on one side.

The two base panels have a slit down the middle which interlock once the card is assembled.

To have the actual hockey card quality, you will need to select 16pt Card C2S and the Gloss Lamination for coating.

Your file has to be exported as one PDF file, and the number of versions will determine the number of pages. So if you have 25 different cards per set, your file will have to have 50 pages (the first page will be the front of the first card, the second page is the back of the first card, the third page is the front of the second card and so on).

The stack of 50 cards printed on14 pt C2S would be 3/4".

They are 1/4".

Our trading card product is limited to 60 versions, so to print 72 versions, you will have to place two products in the shopping cart, the first one with 60 versions and the second one with 12 versions, keeping all original specs.

Fine point permanent marker should work fine on all types of finishes. Regular pens or pencils can be used only on uncoated stock, but it does not have a look of premium trading cards (laminated card).

We do offer design services.

The wrapping is a thin plastic film that shrinks when it's exposed to heat and keeps the content in place. It can't be printed because it's too thin and it shrinks. We can produce the trading card boxes instead.

We can print trading cards on a 100# Rolland Enviro Cover that is 100% produced from post-consumer waste.

A standard bleed of 0.125'' on all sides is required.

Yes, we are offering printing services on synthetic paper.

4.2 mil paper is equivalent to 100# text paper and it can be folded. 10 pt and 14 pt are heavy, cover weight papers and can't be folded.

The sizes are displayed for a flat (unfolded) brochure size.

The easiest way is to use a pricing calculator on the product page. If you are looking for something that is not on the site, please let us know the specifications and we can provide the price.

Window Clings will last at least one year.

There are 4 possible options available on our product page regarding the shape of Window Clings, and every shape has different sizes available to choose from.

Our window clings are made of 4 mil frost white or clear synthetic material.

For easy application, follow these steps:  • Clean the surface you want to use with soap and water. After that, wipe the surface dry to ensure there's no residue or lint left. • Wet the application surface again with a bit of soap and water. Make sure that the surface is not too wet because it will cause bubbles to form. If there are bubbles after application, you can smooth them with your finger. Start from the center and move towards the edges. • Remove the window cling backing. • Place the Window Cling on the desired area by pressing down on one edge with your fingers. Slowly work towards the other edges to make sure there are as few bubbles as possible. You may need to lift it a few times to get a smooth application.

The labels come with a score on the back liner to help you split and peel the liner before applying to your product. Make sure to start from one edge and ensure you start by aligning it straight then apply light pressure until it's fully applied to your application.