Spiral Coil Bound books utilize a plastic coil to hold the pages together. The coil is available in many different diameters, making this option ideal for a wide range of page counts and applications. As well, the pages can be opened up to 360 degrees, allowing the book to lay flat as well as opened fully. For this reason, it is standard for the cover to be printed on a heavier stock. This binding style is commonly seen in agendas, manuals, notebooks, guides, and any document or publication that is left open for long periods.
Print spiral coil bound books in short runs of 10 copies all the way to 25,000 + runs printed on our state of the art offset printing equipment.
What size and position are the punches for spiral binding?
- The Spiral hole punch has a 4:1 pitch (4 to 1) which means every inch there will be 4 holes.
- The punched hole will be a round shape of 0.1875" (4.572mm).
- The spacing between each hole is also the same as 0.1875" (4.572mm)
- The distance from the edge of the sheet to the furthest edge of the hole is 0.27" (6.858mm)
- The distance from the edge of the hole closest to the edge of the sheet is 0.09" (2.286mm)
Are there special margin requirements for Spiral Binding?
As shown above, the punches for the spiral extend approximately .25"-.27" in from the spine edge. Therefore, this has to be taken into account when setting up the margins for a spiral book and added to the desired margin of the design.
If for example a .5" margin is needed, then the margin on the spine edge would be .5" plus the .25" for the binding, for a total of .75", but only on the spine. On the other three edges, the margin would be .5" to give the illusion that the content is centred. The reader's eye will basically ignore the part of the page that is covered by the binding, so if the content is truly centred on the page it will look li
As well, the spine edge alternates on the "even" and "odd" pages. This is independent of any actual page numbers that are added to the artwork, as the numbers can vary based on whether the cover is included, whether there's a table of contents, if there is a section at the beginning that is numbered separately, etc.
If the front cover is "page 1", the inside front cover would be "page 2", etc so for a conventional book that is read from left to right, all of the odd pages starting with the front cover would have the spine on the left-hand side, and all the even pages starting with the inside front cover would have the spine on the right-hand side.
What colours of spiral can be ordered?
The standard options of White and Black are available for order through the online calculator. Other colours are available upon request and would require a custom estimate.
What are the benefits of choosing Spiral Binding?
Because the spirals allow the pages to rotate 360 degrees, Spiral Binding is perfect for applications where it is advantageous for the reader to be able to open the book flat and have it stay open, or even opened 360 degrees and held in one hand. This could be for manuals, handbooks, guide or map books, or other such uses.
Page counts can range from 8 to 400 pages, as the spiral is available in many sizes. As well, the coil can be positioned on either the top or the left
Because the spiral is made of plastic and does not have any sharp edges, it can be a slightly safer option for applications to be used by children, or in situations where metal is not appropriate or possible. The spiral is also reasonably flexible, meaning it will "bounce back" into its original shape if something heavy is placed onto it, and will withstand rougher handling than other types of binding.
Finally, Spiral binding can accommodate section tabs, however, a custom quote would be done for the exact number and positioning of the tabs required, due to the range of options.